A very important element in glass bottle production is the glass bottle mold. Below I have listed the basic steps to make a glass bottle mold to share with you all.
1. Planning drawings: hand over the sample glass bottle or size to the planner to plan the drawings of the entire machine group;
2. Sand turning blanks: turn out the blanks of each component according to the drawings;
3. Milling with a milling machine: The initial mold and blank are milled into the plane by a milling machine;
4. Make all parts at the same time: all workshops, all horses and all lathes are started, and their respective divisions of labor; there is a dry primary mold, the end of the mold is the bottom of the mold, one pass is completed, and then the second finished
At the end of the mold bottle, there are dry bulkheads, dry funnels, dry taps and dry die, and then someone will dry the core or punch and cooler;
5. Carving: After the second step is completed, put the shape or original model into the carving lathe, and automatically hand over 99 jobs to the carving according to the planned program, thus saving time and energy;
6. Polishing: Use fine sandpaper to polish the mold and final mold carved from fine carving;
7. Assembly: Assemble the components assembled on each production line, and then combine the loose parts into finished parts;
8. Drilling: Drilling or exhausting all the finished parts/determined according to the drawings.
Post time: Apr-29-2022